600W ballast

Digital 600W Digital Ballast

New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.

With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.

Lumii Black 600w Digital Ballast 250w-660w

This 600w Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp.

​​​​​​​The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output. 
For best results, always use the correct lamp per wattage setting

Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting.

Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps  for plants.

The electronic version of Master gear has a high power factor, low energy loss, open circuit and output short circuit protection. Easy installation!

Output power varies ± 3% when the input voltage varies in the range between 20% and 18%. The voltage of the lamp varies in the range of the standards ANSI. Stable output power can be increased lamp life by 30% and reducing the variation of the color temperature.

• Type lamps, sodium lamps with high pressure
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

GSE electronic ballast can manage all kind of MH metal highlight and HPS high pressure sodium bulbs at 250-400-600W.

A UV- acid- and waterproof foil build in LED indicate the status and on 3knobs you can change the wattage. By steps from 660W-600W-400W-250W or with push and hold even step less from 660W to 250W. GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components.

A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb. The ballast comes as a finish assembled product with 3m connector cable and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.
 

Electromagnetic ballast for HPS and MH lamps.

Master Gear suitable for coupling with sodium or metal halide lamps with power 600W. The maximum possible distance from the lamp to the throttle is 20 meters for HPS and 5 meters for MH lamps. MASTER GEAR 600W consists of inductors, capacitor and terminal block for connecting input voltage and lamp. 6,2A.

The EuroGear Pro ballast closes the gap between cheap low-quality ballasts and expensive high-end products.

Among IP 54 and CE certifications the EuroGear Pro is equipped with a thermal protection to eliminate potential danger of fire. Additionally after production every single ballast is being checked for full operability, so that a safe continuos operation is guaranteed. The EuroGear Pro is fully cabled.

Specifications

• Compact electromagnetic ballast with thermal protection
• 100% EU
• for HPS and HPI-type lamps
• IP 54 and CE certified
• Excellent cost-benefit ratio
• Splashproof enclosure
• 230V/ 50Hz
• Power cable length: 1.5 m
• Lamp cable length: 3.55 m

This is the most effective digital ballast on the market!

Powers two 600 watt bulbs or fixtures at the same time from a single outlet. Separate on/off switches and dimmers for each output; choose between running only one lamp or two. Works with all lamps and features Improved RF shielding. This is the ideal ballast to use with the Horizon Dual Socket Super Nova Reflector. 

This ballast is also dimmable, it can run at 50% or 75% of full power. Adjustments are done by dials located on the top of the unit, it features a gradual dim that eases your bulb into the lower or higher wattage. The Nanolux 600w Dimmable Dual Ballast is ideal for use with either two reflectors in close proximity or with a dual bulb reflector setup.

• ​600W
• Input Voltage: 120-240
• Input Current: 5.2/2.6A
• Bulb: SE
• Dimming Settings: 110%, 100%, 75%, 50%
• PF: >0.99
• THDI: <10%
• CF: <1.7
• Input Frequency: 50/60
• 3 Year Bumper to Bumper Warranty

Integrated HID system with ballast, ignitor and compensation capacitor, for sodium and metal halide lamps.

All components are wired which gives a savings on time and costs. Compact dimensions for easy installation.

• With screw terminal 0.75–2.5 mm²
• With earth terminal
• Other versions available on request

More light output per watt of energy consumed

Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting. 

Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps  for plants.

Why Digital Ballasts?

• More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
• Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
• Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
• Completely Silent - No noise or vibration of any kind
• Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
• Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.