GSE dim 250W-660W

Price: L22,288.00lek

Code:

1448
Weight:

2.900 Kgs

GSE electronic ballast can manage all kind of MH metal highlight and HPS high pressure sodium bulbs at 250-400-600W.

A UV- acid- and waterproof foil build in LED indicate the status and on 3knobs you can change the wattage. By steps from 660W-600W-400W-250W or with push and hold even step less from 660W to 250W. GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components.

A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb. The ballast comes as a finish assembled product with 3m connector cable and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.

Quick Buy

Just 3 fields to fill in

We will contact you to finalize the order

250w ballast 400w ballast 600W ballast digital ballast

Send to friend

Rate this product

Tehcnical data:

+ 10% output power
Soft Start Technology
Protect the lamp
LED status display
3 years warranty

Instructions:

Connect the lamp to the desired power 250W, 400W or 600W MH (metal halide lamp) or HPS (high intensity sodium lamp) in E40 socket or reflector. Connect the main cable to the household socket 230V / 50Hz. Now ballast controls all LED, which flashes for 5 seconds. Then 7. LED OFF- stand --- --- ERROR include, 4. LED 600W mode flashes. 2. Now button up / down to select the wattage of the bulb, confirm with 1. OFF-button stand, 7. LED OFF-stand --- --- ERROR will flash continuously.

Warning: if you choose a more powerful bulb can cause serious damage.

You can reduce the intensity of light from top to bottom, for example: 600W reduced to 250W; 600W reduced to 250W; 250W can be reduced more

600W bulb can work overload mode, which is 10% more output power to the lamp. (We do not recommend it as damaging the lamp). GSE is not recommended to decrease the intensity of each type of lamp, because it changes the color of the lamp).

To reduce the intensity briefly press the button 2. Up / down, it goes immediately from 3. LED overload to 4. LED 600W mode to mode 5. LED 400W and 250W LED mode 6.

Ballast needs maximum 2 minutes to eclipse the light bulb to cool. 2. When you press the up / down and hold it varies the amount of dimming ballast. The value is shown on the LED. Between 600W and 500W, 600W LED mode 4. lights and 5. LED 400W mode flashes between 500W and 400W 5. LED 400W mode lights and 4. LED 600W mode flashes. You have the same functions between 400W and 250W. Ballast will remember these settings, the next time you run it, ballast lose your settings if it was disconnected from the network for 72 hours or has been expelled from the button OFF; You will have to run it manually.