GSE Timer Box IV 8x600 W - Timer box

Features: - 1 pc. 24-hour timer - Green dimmable display - Designed for inductive loads - 0-10V or PWM output - Temperature display - Temperature monitoring during emergency stop - Blackout - Sunrise/sunset - Day counter - Time format - 0-24h or 12 AM/PM - Temperature format °C or °F - Starting heating when the light is off Technical specification: Body: WxHxD= 200x255x95mm Timer box: WxHxD= 230x300x110mm 2 poles 3x10A 4'600W Voltage: 230V / 50Hz Protection class: IP54 The Timer Box IV has a digital display that is based on a 24-hour mechanical clock. With a left-right control button, it's an easy way to set the clock even faster than a mechanical timer. 48 segments show the current time, programmed duration, day counter and room temperature. The clock has a pre-programmed 12-hour or 18-hour cycle, and can be set with a user-selected time in hours/minutes. The clock has a day counter and a temperature probe for emergency shutdown in case of overheating to protect your plants. Power LED indicates emergency stop. In addition to the on/off function specifically for inductive loads, the Timer Box IV has a 0-10V or PWM output for dimmable electronic ballasts or LED lamps. This signal dims the lamps when the temperature rises or functions such as sunrise/sunset are also possible. When the lights are off, the heater is turned on. (Energy Management). There are two ways to manually toggle the current ON/OFF state. The first is permanently, and the second until the next cycle. This way you will avoid forgetting to set the clock back to automatic mode when you leave the room and causing any damage to your plants. In the event of a power outage, the internal battery will save all your settings and the current time. (Battery life 10 years) The timer box is ready for use. This reliable switch box comes complete with a sealed IP54 cover (the protection class offers protection against water splashes from all sides), capped plugs and a low voltage temperature sensor, making it ideal for wet rooms. The controller comes with two 1.2m power cables and a 4m sensor cable that can be extended to 10m if required.