SonoTrap Acoustic Ducting - Ø102mm/6m

Price: L0.00lek

Code:

3620
Weight:

2.000 Kgs

Fully flexible, thermally and acoustically preinsulated ducting with a polypropylene fabric cloth inner duct to encapsulate a high carbon, spring steel wire helix.

The inner core is wrapped with a thick blanket of high-density insulation and covered with an outer vapor barrier constructed from multiple layers of black polyester.

insulated duct

Send to friend

Rate this product

How to Use Sono Trap:

Sono Trap acoustic ducting fits directly over the flange of any appropriately-sized extractor fan or filter and an appropriately sized duct clip is usually used to hold it tightly in place.
The acoustic ducting can then be run to your air outlet/inlet.
Although SonoTrap acoustic ducting works fine when run loose, the noise coming out of the end of the ducting will be greatly reduced if it is stretched out as much as possible.
To reduce Sono Trap Acoustic Ducting down to the correct length, use a sharp pair of scissors to cut the aluminium and fibreglass and a pair of sharp wire cutters to snip the spiral wires in the appropriate place.