Milwaukee EC monitor MC310
-
Code:1859
-
Weight:0.190 Kgs
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.
Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
- Professional EC - Conductivity Monitor
- User selectable Hi/Low Set Point
- Manual 1 point calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml 1413 µS/cm calibration solution
- MA812/2 EC Conductivity Probe with 2m cable (BNC connector)
Quick Buy
| SPECIFICATIONS | |
| Range | 0.0 - 10.0 mS |
| Resolution | 0.1 mS/cm |
| Accuracy | ±2% Full Scale |
| Setpoint range | 1 - 5 mS |
| Alarm | Active when reading is higher or lower than set point |
| Temperature Compensation | automatic; from 5 to 50 oC |
| Probe | MA812/2 (included) |
| Environment | 0 to 50 oC / 32 to 122 oF; max RH 95% |
| Power Supply | 12 VDC adapter (included) |
| Dimensions | 148,5 x 82,5 x 32 mm |
| Weight | 180 g (meter only) |
The tester is covered by a warranty for defects for a period of 12 months from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.
This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons.
