monitor Milwaukee pH MC110
Price:
L18,122.00lek
-
Code:1858
-
Weight:0.160 Kgs
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.
An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.
- Professional pH monitor especially designed for use with aquariums.
- User selectable Hi/Low Set Point
- Manual 2 points calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution
- Double junction pH electrode with 2m cable (BNC connector)
Quick Buy
Just 3 fields to fill in
| SPECIFICATIONS | |
| pH Range | 0.0 - 14.0 pH |
| pH Resolution | 0.1 pH |
| pH Accuracy | ± 0.2 pH |
| Calibration | Manual 2 points |
| Setpoint range | 3.5 to 7.5 pH |
| Alarm | Active when reading is higher or lower than set point |
| pH Electrode | MA911B/2 (included) |
| Environment | 0 to 50 oC / 32 to 122 oF; max RH 95% |
| Power Supply | 12 VDC adapter (included) |
| Dimensions | 148,5 x 82,5 x 32 mm |
| Weight | 160 g |
The tester is covered by a warranty for defects for a period of 12 months from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.
This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons.
