BudBox ProWhite XL+ 150x150x200

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.