This reflector is characterized by its absolute durability.
Centering the reflector and the cross beam from the reflector to the bracket gives a high degree of stability and thus makes it an ideal reflector even for heavier lamps such as energy saving ones.
 
 
Characteristics:

- Material: Putty (86% reflection)
- Dimensions 47 cm x 47 cm

- base E40

- for 400/600 W HPS/MH lamps

- with cable - 5 meters

The electronic version of Master gear has a high power factor, low energy loss, open circuit and output short circuit protection. Easy installation!

Output power varies ± 3% when the input voltage varies in the range between 20% and 18%. The voltage of the lamp varies in the range of the standards ANSI. Stable output power can be increased lamp life by 30% and reducing the variation of the color temperature.

• Type lamps, sodium lamps with high pressure
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

All light bulbs need to be wiped clean of finger prints after installation.

Our micro fiber lamp cleaning cloth is perfect for doing this. Removes finger prints and dust from lamps, glass, light fixtures, etc. Individually packaged.

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

Adjust A Wing Socket 

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but is made of a different grade of aluminum.

Includes Heat shield Spreader.
Tomax has the same advantages as the original, including an impressive low-hanging position over your plants and balanced light distribution.

No lamp included.

Economical dual parabolic reflector
Control the "hot spots" by attaching the "Heat shield Spreader"

EFFECT

- Twice as powerful and effective as most other reflectors on the world market
- Increases growing area for each lamp by up to 75%
- Increases lamp output by up to 50%. Reduces heat and saves energy

The reflector is a surface that reflects through the refraction of light.The main function of the reflector is to reflect light on your plants, covering the maximum area and reflecting the maximum light emitted by your chosen lamp. directly on your plants.

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but is made of a different grade of aluminum.

Includes Heat shield Spreader.
Tomax has the same advantages as the original, including an impressive low-hanging position over your plants and balanced light distribution.

No lamp included.

Economical dual parabolic reflector
Control the "hot spots" by attaching the "Heat shield Spreader"

EFFECT

- Twice as powerful and effective as most other reflectors on the world market
- Increases growing area for each lamp by up to 75%
- Increases lamp output by up to 50%. Reduces heat and saves energy

The reflector is a surface that reflects through the refraction of light.The main function of the reflector is to reflect light on your plants, covering the maximum area and reflecting the maximum light emitted by your chosen lamp. directly on your plants.

Parabolic Vertical & Horizontal HPS & MH Reflector - [Size: Medium (Diameter 89CM)]

• Brushed aluminium on both sides
• Includes assembly hardware
• The reflector includes a lamp socket mounting bracket. The lamp can either installed vertically or horizontally
• Exclusive adjustable bracket allows the user to raise or lower the lamp within the interior of the reflector

Features
 

• Innovative Design: can be installed vertically or horizontally
• User-friendly, easy installation
• Made from premium highly reflective aluminum
• Comes with built-in UL-certified socket and 4.5m pre-wired lamp cord
• The lamp is not included in the system

The Azerwing reflector of PrimaKlima is how the famous Adjust-A-Wings reflector.

• A stable railing make easy the suspension of Azerwing tremendously, just like the well thought-out cable management. But a real feature of Azerwing is the ability to adjust the wording not only in height but also in pitch.
• That is enormously helpful particularly with heavy bulbs such as energy-saving lamps and enables rapid adaptation, without having to disassemble the reflector only.
• Three enclosed rod sets make it possible to adjust the Azerwing on each required area. The Azerwing suitable for 400 and 600 W bulbs.
• Azerwing Reflector Medium
• Highly reflective PVD Coated reflector material (86%)
• Adjustable angle bulbs
• Thoughtful cable management
• Stable suspension
• Three settings on the leaf width

The Azerwing reflector of PrimaKlima is how the famous Adjust-A-Wings reflector, coated with PVD reflector plates fitted.

• A stable railing make easy the suspension of Azerwing tremendously, just like the well thought-out cable management. But a real feature of Azerwing is the ability to adjust the wording not only in height but also in pitch.
• That is enormously helpful particularly with heavy bulbs such as energy-saving lamps and enables rapid adaptation, without having to disassemble the reflector only.
• Three enclosed rod sets make it possible to adjust the Azerwing on each required area. The Azerwing suitable for 400 and 600 W bulbs.
• Azerwing Reflector Medium
• Highly reflective PVD Coated reflector material (96%)
• Adjustable angle bulbs
• Thoughtful cable management
• Stable suspension
• Three settings on the leaf width

Hammered Stucco grow reflector

Specifications

• HID/CFL Euro Stucco Wing Aluminum Reflector 
• highly reflective alumimum 
• work for HID and CFL bulbs 
• broad light spread

Spotlight enabled aluminium, finely polished, E40 ceramic socket enabled.

LONG-GLOSS 50 V Reflector Shiny: quality budget horizontal reflector will take all lamps up to 1000w inclusive. Compatible with most other ballasts presently available.

Aluminum Reflector Micropunto Pearl-Pro With it you get a much higher standard reflector performance.

May increase by 60% the number of lumens keeping yourself and your own lamp ballast.The secret lies in its micropunteado system, spreading more evenly lamp lumens.Micropunteado your new system is more efficient. Causing a dramatic increase in lumens.The new junction box increases safety. Keeping moisture away from crop electrical connections.The metal mounting plate is more resistant. It supports more weight lamps.

• 2 Presses safety chain connection. So you can install more than one reflector with less wiring.
• Passing the cable from one to another.

Adjust-A-Wing Enforcer

The Enforcer is a hobby version of the popular Avenger!

It's shape gives the same even distribution of light and reflectivity as the Avenger but is made from slightly lower grade aluminium and doesn't include the Super-Spreader.

if you like the thought of using the Adjust A Wing Avengers but can’t quite justify paying for the premium product, they are at a much more affordable price, Adjust A Wing Enforcer gives you the same benefits as the Avengers, including impressively low hanging positions over your plants balanced distribution of light.

Enforcer :- This is our new “budget priced” range. Reflection is approx 86% & guaranteed to maintain its full reflection for a minimum of 3 years… Probably good for 5+ years of continual use but we can’t 100% guarantee that.. These reflectors work extremely well for the price you pay. Great way for customers to try out our designs without committing to the more expensive Avenger range straight up. 

ECONOMY DOUBLE PARABOLIC REFLECTOR

• Low Cost for High Reflectivity
• Control "Hot Spots" by attaching a "Super-Spreader"

EFFECT

• Twice the power and efficiency of most other reflectors in the global market
• Increase the growing Area under each lamp by up to 75%
• Increase Yield per Lamp up to 50%. Reduce heat, Save power

Adjust-A-Wing Enforcer

The Enforcer is a hobby version of the popular Avenger!

It's shape gives the same even distribution of light and reflectivity as the Avenger but is made from slightly lower grade aluminium and doesn't include the Super-Spreader.

if you like the thought of using the Adjust A Wing Avengers but can’t quite justify paying for the premium product, they are at a much more affordable price, Adjust A Wing Enforcer gives you the same benefits as the Avengers, including impressively low hanging positions over your plants balanced distribution of light.

Enforcer :- This is our new “budget priced” range. Reflection is approx 86% & guaranteed to maintain its full reflection for a minimum of 3 years… Probably good for 5+ years of continual use but we can’t 100% guarantee that.. These reflectors work extremely well for the price you pay. Great way for customers to try out our designs without committing to the more expensive Avenger range straight up. 

ECONOMY DOUBLE PARABOLIC REFLECTOR

• Low Cost for High Reflectivity
• Control "Hot Spots" by attaching a "Super-Spreader"

EFFECT

• Twice the power and efficiency of most other reflectors in the global market
• Increase the growing Area under each lamp by up to 75%
• Increase Yield per Lamp up to 50%. Reduce heat, Save power

Defender e model Adjust-A-Wings created more professionally oriented than you.

It has all the qualities of the model Enforcer, but unlike him to combine a combination of high-end technology, aesthetics, durability, efficiency and easy installation.

The main difference is that in making Defender is used extremely robust aluminum (H18) used in aircraft construction, which is extremely robust and extremely flexible. This allows keeping the perfect parabolic curve so important for the dispersion of light, otherwise vulnerable to changes in the assembly and disassembly of the reflector. Furthermore, the surface is coated with titanium white, heat-resistant polymer coating reducing radiated heat lamp and having the ability to spread the light very evenly and having reflectivity of 86%.

Characteristics:

• Size: 55h80 cm
• Suitable for: 600W or 400W sodium (HPS) and metal halide (MH) lamp
• Lit area: Up to 2.3 m2.
• The kit contains:
• 1 PC. - Adjust-A-Wings Reflector, Defender medium
• 1 PC. - spreader
• 1 PC. - Cap
• - Cordless
• - 86% reflectivity
• The kit does not include the bulb.

• Twice the power and efficiency of most other reflectors in the global market;
• Increase the growing Area under each lamp by up to 75%;
• Increase Yield per Lamp up to 50%;
• Reduce heat, save power;
• Corrosion Resistant;
• 97% Reflective;
• Glass Coated Super Alloy;
• Adjustable double parabolic reflectors.

Made from the most high-quality materials, this reflector brings a number of benefits to both plants and gardeners.

Comparison To Conventional Reflectors:

• Twice the power and efficiency of most other reflectors
• 75% Larger Growing Area
• 43% Saving In Electricity
• 43% Less heat
• The super reflective surface is vapour coated with molten glass and titanium dioxide. It is coated in PVD / Ceramic.

Lucilu budget reflector 

The Lucilu is a budget reflector. It is identical to the Adjust-a-Wings reflector in shape and quality, but a lot smaller. Also, the Lucilu is not adjustable and does not standard come with a heatspreader. The aluminium reflector reflects 97% of the light. To enlarge this reflective surface it has a very fine hammered profile

Effective use of light and reflection

Shape and reflective capabilities make the Lucilu reflector 30% more effective than conventional reflectors. This means you can enlight a 30% bigger surface.

It has a special “PVD” coating (glass coating) designed to reflect the colours from the spectrum which are important to the photosynthesis. Red, orange and blue. The coating also prevents the reflector from corroding so it stays highly reflective.

Ideal for use in small spaces

If you would like to work with an Adjust-a-Wings reflector, but discover that it’s simply to big for your growroom, the Lucilu reflector is your perfect alternative. You work with a reflector that looks a lot like the Wing. However it’s not adjustable and isndoes not standard come with a heat spreader. however, the spreader of the Wing fits on the Lucilu. 

4 layer super reflector

This unique 4-layer, glass enamelled coating not only produces maximum reflectivity, but focuses on the specific parts of the light spectrum.

Maxlight Reflector by HighPro features a white aluminium exterior for better overall light distribution on the growing area and a high-quality stucco aluminium interior that provides plants with optimum reflectivity.

It is equipped with the cool tube system, which allows you to place the reflector closer to the plants and thus improve the yield, as excess heat is eliminated through two lateral vents with the aid of a fan. It also features a glass screen that acts as a heat insulator between the lamp and the plants. This screen is fixed with some small metal parts that allow easy disassembling for comfortable cleaning.

DIAMOND REFLECTOR FOR 400W BULB

With a standard reflector you usually get "heat spots" and spots that don't get enough light under the reflector.This reflector concentrates the light evenly on a surface of 100cm x 100cm and is designed for 250 and 400W bulbs.

Diamond Reflectors are the result of 15 years experience in the hydroponics industry. Photometric Laboratory testing has revealed that diamond reflectors produce an average light intensity of up to 50% more than conventional reflectors. This Diamond Reflector has been optimized for use with a 600w or 1000w lamp with a coverage of 1.2 m2 (square meters) and a mounting height of 30-50cm above your plant tops.

• Suitable for 600w - 400w HID Lamps
• Can produce up to 50% yield increase
• Unique diamond shape

Reflector Diamond 600W

Diamond Reflectors are the result of 15 years experience in the hydroponics industry. Photometric Laboratory testing has revealed that diamond reflectors produce an average light intensity of up to 50% more than conventional reflectors. This Diamond Reflector has been optimized for use with a 600w or 1000w lamp with a coverage of 1.2 m2 (square meters) and a mounting height of 30-50cm above your plant tops.

• Suitable for 600w - 400w HID Lamps
• Can produce up to 50% yield increase
• Unique diamond shape

Power plant Mantis Adjustable light Reflector The only adjustable reflector that can focus light on unproductive areas.

The professional’s choice for replacement and supplementary lighting. New and improved! Adjustawing from Hydrogarden are now called the Mantis Pro, easier to reposition and more robust!

Introducing the Mantis Pro reflector:

~ Adjustable pitch parabolic design for maximum light traferral
~ Virtually indestructible yet flexible construction
~ Quick and easy to set up
~ Easy to make adjustment

The wings form a succession of perfect dual parabolic shapes when assembled. This enables the grower to focus light spread and intensity according to the plants individual needs.

The Mantis Pro reflector is incredibly power efficient and versatile. When adjusted to its widest, it may be positioned very near to the plants for both maximum growth. Alternatively, the reflector may be adjusted to a more narrow setting and position proportionally further from the vegetation to suit the light and heat requirements of sensitive plants.

The Mantis Pro is so flexible , it is possible to have one wing in a narrow setting and one in a wide setting to encourage growth in a unproductive areas of the grow room.

The reflector is constructed using the minimum number of components and moving parts. Reflector ends, housings, and other bulky structural supports have been eliminated. Designed in this manner the Mantis Pro is lightweight and does not trap heat or restrict air movement around the lamp or growing area.

The reflector is suitable for 400W & 600W lamps.

Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

E40 lamp-holder is included.

Reflector suitable for 600W lamps.

The Cool Tube is a tubular armature of glass with the function of regulating the temperature of the lamp.Warm air given of by the lamp is sucked out with the result of a lower heat in the growing are.Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

Reflector suitable for 600W-1000W lamps.

The Cool Tube is a tubular armature of glass with the function of regulating the temperature of the lamp.Warm air given of by the lamp is sucked out with the result of a lower heat in the growing are.Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

The SPUDNIK is available in two models, compatible with 125mm (5”) or 150mm (6”) ducting.

Customers simply attach a Prima Klima inline ventilation fan to blow cool air over the lamp, cooling the light fixture and allowing the hot air around the lamp to be ducted out of the room before it gets a chance to create heat issues.

Choose SPUDNIK—Because Every Inch Counts!

The SPUDNIK has been the choice of the professionals for years—with a hugely efficient reflector shape complete with an incredible 97% reflective VEGA/MIRO9 insert, the SPUDNIK simply will not be outshone by any other air-cooled units.

• 97% reflection
• Miro9 inside reflector
• Stucco cap 0.8 mm shaped reflector
• Includes glass sheet - 4 mm
• Flange – 125 mm (5”) or 150 mm (6”)

The SPUDNIK is available in two models, compatible with 125mm (5”) or 150mm (6”) ducting.

Customers simply attach a Prima Klima inline ventilation fan to blow cool air over the lamp, cooling the light fixture and allowing the hot air around the lamp to be ducted out of the room before it gets a chance to create heat issues.

Choose SPUDNIK—Because Every Inch Counts!

The SPUDNIK has been the choice of the professionals for years—with a hugely efficient reflector shape complete with an incredible 97% reflective VEGA/MIRO9 insert, the SPUDNIK simply will not be outshone by any other air-cooled units.

• 97% reflection
• Miro9 inside reflector
• Stucco cap 0.8 mm shaped reflector
• Includes glass sheet - 4 mm
• Flange – 125 mm (5”) or 150 mm (6”)

Completely sealed with double casketed glass for an air-tight seal.

Swing Stop retention cable keeps glass from abruptly swinging down. 6 in integrated air-cooled fittings with bead ring. Galvanized steel housing with major brand powder-coating. Made with highly reflective textured aluminum. Includes socket and 15 ft. lamp cord.

The Superb Aerowing from Powerplant has revolutionised indoor cultivation by permitting a huch higher canopy level & far greater temperature control, than conventional reflectors.

These fantastic reflectors really are exceptional at keeping those grow-room temperatures low and as a result; ensuring your yields are high.Featuring a toughened 4mm glass plate which keeps heat away from your plants, the Aerowing expels heat through the two 6" openings at either end and can be vented by using either 6" just ducting with or without a small fan.

The Powerplant Aero wing reflector features a highly reflective interior to make the most of your lumen output, yet can grow right up to only a few inches below the reflector.

This is a highly efficient way of lighting all sized grow-rooms and several Aerowings can even be joined together, creating a highly effective lighting solution for single tents or much larger grows too. Each kit comes complete with hanging hooks, adjustable lamp-holder, 5 metres of cable with IEC connection as well as the glass panel and frame.

Dimensions: (h,w,d) 20 x 60 x 54cm

Raptor Reflector 8 inch air cooled

SIZE MATTERS! Hydrofarm's Raptor reflectors were designed with our customers' needs in mind. You wanted bigger, broader, brighter light coverage... our engineers designed it. Maximum air cooling with built-in flanges. Comes complete with cord set, hinged frame, tempered glass, and wire hangers. 

• BRIGHT – Full four-sided specular 95% reflective European hammertone interior

• BEST IN CLASS – Engineered design delivers optimum light efficiency

• STRONGER & MORE DURABLE – Multi-point reinforced pre-galvanized steel construction and corrosion-proof electro coating

• Tempered, sealed glass lens

• Fully gasketed and sealed for effective heat isolation and cooling

• Built-in aerodynamic socket, instructions, and hanging hardware

Raptor 8 inch dual reflector

Run up to two 1000 watt lamps simultaneously – and mix and match HPS and MH lamps for balanced output. Maximum air cooling with built-in 8" flanges. Comes complete with two 15' cord sets, hinged frame, tempered glass, and wire hangers.

SIZE: 13"H x 33"W x 43"L

• BRIGHT – Full four-sided highly reflective specular hammertone interior

• BIGGER & BROADER – Run up to 2,000 watts in one reflector

• MIX & MATCH SPECTRUMS – Sodium and halide, lower wattage/higher wattage

• ADJUSTABLE – Change mounting positions easily

MONSTER WARRIORS: Extra large air-cooled reflector 150mm diameter, with glass front, ventilated area.

Through an innovative front opening slide, you can just unscrew the locks to inspect the interior. Its octagonal shape improves light distribution with an increase up to 97% of reflection!

Features:

• Central fold in the shape of V.;
• Forced air cooling;
• Dimensions: 59 x 54 x 26 cm.
• 150mm ventilation;
• 5 meters of cable with molded plug;
• E40;
• External color white 100%;
• Possibility of adding a double and a flexible sleeve reflect heat (anti-detection);
• excellent design;

MONSTER WARRIORS: Extra large air-cooled reflector 200mm diameter, with glass front, ventilated area.

Through an innovative front opening slide, you can just unscrew the locks to inspect the interior. Its octagonal shape improves light distribution with an increase up to 97% of reflection!

Features:

• Central fold in the shape of V.;

• Forced air cooling;
• Dimensions: 59 x 54 x 26 cm.
• 200mm ventilation;
• 5 meters of cable with molded plug;
• E40;
• External color white 100%;
• Possibility of adding a double and a flexible sleeve reflect heat (anti-detection);
• excellent design;

The Dominator XXL grow light reflector is made with commercial growers in mind.

THE BIGGEST WINGSPAN IN THE MARKET!

Broad light spread allows close placement of plants for maximum light delivery in low-clearance locations.Equipped with safety cables for safe and easy maintenance, constructed with heavy dutypre-galvanized steel. Completely sealed gasketed glass provides tight fit. Made from premium 95% reflective European aluminium. Comes with buil-in socket, 15' pre-wired lamp cord, and hanging hooks.

- Highly reflective aluminium

- Safety cable holds glass door in place

- Completely sealed with hinged glass

- Built-in streamlined socket

- Dimensions: 10 1/5''  x   27 3/5''  x  37''

- Accepts: HPS/MH bulbs from 400W to 1000W

The Yield Master II grow light reflector is made with commercial growers in mind.

The SunGro grow light reflector is made with commercial growers in mind.

Features:

HEAT SHIELD SMALL SPREADER FOR 400W AND 600W BULBS

Using the "spreader", which reduces radiated heat from the lamp reflector can be removed to 20 cm above the tops of the plants.

HEAT SHIELD LARGE SPREADER FOR 600W AND 1000W BULBS

Using the "spreader", which reduces radiated heat from the lamp reflector can be removed to 20 cm above the tops of the plants.

Reflector complete with two lamps CFL 2x55W.

Suitable for the germination of seedlings as well as the phase of the vegetation and growth.

RAIL LIGHT MOVER

Moves lights back and forth on a rail with a length of 220cm. It can thus be placed closer to the plants, since it does not last long in one place. Increases the efficiency and life of the lamp.

• Saves energy and increases efficiency
• Speed - from 3 to 3.30 minutes in one direction
• Pause the movement from 2 to 120sek.
• Adjusting the speed of movement
• Ability to limit vdizhenieto by parentheses.
• Withstands 10 kg
• Power of drive motor: 12W

This system will allow you to duplicate the cultivation area with a single focus.

The SunRail is a system of lightweight, adjustable and self-propelled rails, which carry a lighting system (or several) along an aluminum rail 1.90 meters in length, and can cover an effective lighting area of 1.20 x 3.50 meters.The SunRail can support up to 3 devices simultaneously thanks to the high resistance of the aluminum and the high-performance motor that moves the system.

This system goes through the rail to where the user determines and stops at each end for a period that also adjusts the user. This system is ideal for use with the reflector adjust a wings to increase the projection of light.