If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

The 720W Horticulture LED Grow Lights have 6 LED panels, a high-quality chip and efficient LEDs, which generate a full spectrum for every stage of your plants' development.
A light source suitable for the entire development cycle from vegetative to the end of flowering. The lamp has a regulator (dimmer) for adjusting the power according to the needs of the plants and their stage of development.

The 720W SE LED light produces a high PPF (Photosynthetic Photon Flux) of 1656 μmol/s and photon efficiency (device efficiency) - 2.4 μmol/J.

The LED light can be fully controlled by the TOMAX digital panel or another control system that uses a 0-10V output signal.

Llambë HPS premium - për rritjen dhe lulëzimin Llamba HPS për rritjen dhe lulëzimin Double Ended - me dy pika kontakti. Llamba ka një kabllo në secilën anë, e cila eliminon nevojën për një strukturë brenda trupit për të mbështetur kabllon. Mungesa e kësaj strukture eliminon hijet në traun e emetuar. Vetëm për përdorim horizontal. Lloji: HPS Periudha: rritja dhe lulëzimi Socket: E40 Fuqia (W): 1000

Flexstar Undercanopy LED light 120W - lamp for flowering and growth. A suitable light source for the entire development cycle from vegetative to the end of flowering. There are 2 mounting options for the luminaire, suitable for different applications:

Our Classic polymer lenses color balance blurple (blue + purple) or magenta spectrum LED lighting with 100% UV protection. A flash silver lens coating attenuates bright grow room lights. These grow room glasses meet or exceed CSAZ94 & ANSI Z87+S Sta

*Not for use under full spectrum LED lights.

The TOMAX 645W SE LED Grow Light has 6 LED panels, a high-quality driver and efficient LEDs, which generate a full spectrum for each stage of your plants' development.

A suitable light source for the entire development cycle from vegetative to the end of flowering. The lamp has a regulator (dimmer) for adjusting the power according to the needs of the plants and the stage of their development.


The TOMAX 645W SE LED produces a high PPF (Photosynthetic Photon Flux) of 1548 µmol/s and photon efficiency (device efficiency) - 2.4 µmol/J.


The TOMAX LED can be fully controlled by the TOMAX digital panel or another control system that uses a 0-10V output signal.

Cable with connector (male) for ballasts.Suitable for binding and extension of the connection.

Set of two two cables, each with a thickness 2x0,75mm: 

 

• 2 m with plug for connection to the network 
• 2.5 m to connect the ballast to the lamp

Cable with a plug for connecting devices to the power supply.Cable length: 1.5m

Growroom lenses are specifically designed to reduce the glare from HID, HPS and CFL grow lamps, so you can see your plants in a more natural light.

 

 

It's easier to identify pests and disease problems without having to turn off your grow lights. They also protect the eye from UV and IR rays.

Protective case for growroom glasses

 

 

Thanks to the protective glasses, the growers can observe their plants indoors without the strong light hindering their eyes. Keeping this accessory is just as important! That durable case will help you when you do not use your glasses.

 

 

• black color
• length: 16cm

Metal halides have the more balanced spectrum.

 

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

 

 

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating.

They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

 

• Power Plant HIT/HBU/LU Metal Halide Lamp - 250 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.250w hps = 23,000 lumens

This green light is also used to illuminate areas in indoor cultivation over night to achieve the treatments (including foliar applications) and maintenance of culture without disturbing the dark period of the plants.

 

 

Ideal for large plant cultures.

 

 

• Line Voltage [V]: 220-240V
• Cap/Base: E27
• Bulb finish: Green
• Lamp - type: PAR 38 Coloured
•  

LED Headlight

 

 

• Extensive Lifetime of LED (100,000 hrs)
• Comfort Wearing on your head 
• Adjustable elastic head strap 
• Adjustable inclination 
• Four mode: 1LED on, 7LEDs on, 19LEDs on, 19LEDs flash 
• Durable and low power consumption 
• Rainproof, you can use it in a rainy day 
• Powered by 3 AAA batteries (not include) 
• Dimension: 120mm x 26mm x 35mm 

LED Flashlight with green light for monitoring plant growth

 

Durable, with nine powerful high intensity LED bulbs that provide 100,000+ hours of life. Uses three AAA batteries (not included).

TIMER BOX II DELAYS THE LIGHTING AND HEATING (3 PHASE)

 

The GSE Control Unit (Timer Box III) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME (3PHASE)

 

SIZES AND TECHNICAL DATA:

 

• Size: 500x160x115mm
• Voltage: AC 230V / 400V 50-60 Hz
• Power: 7200W (32A)
• Heating: up to 2400w (resistive loads)
• Mechanical timer: 24h automatically / manually
• Setting interval: 15 minutes
• Mechanical endurance of relays: 10,000,000 cycles
• Protection class: IP54

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL (3PHASE)

 

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING

 

 

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

 

 

 

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

 

 

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

 

SIZES AND TECHNICAL DATA:

 

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

 

 

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W 

 

 

SIZES AND TECHNICAL DATA:

• Case: WxHxD = 180X130X60MM
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

 

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

 

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

 

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL

 

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

 

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

Programmable, digital timer-contact (daily / weekly) with 6 programs.

 

 

Possibility to turn on and off household electrical appliances every 1 minute (step-1 min.) 24-hour electronic time relay.Easy to program with up to 8 on / off. per day or 56 on / off. per week. I want an LCD display with built-in battery.

 

- "Random" (random)
- "Summer time" function
- Countdown timer from 1 min. To 10 hours
- Built-in NiMH rechargeable battery for up to 100 hours.

   

Specifications:

- U = 220-240 V
- AC / 50Hz
- I = 16 A;
- P = 3000 W

Analog timer for automatic control of home appliances, heating systems, lighting.

 

 

 

Turns on and off the connected equipment (lamp, pump, water tank heater). It can be programmed at intervals.

It regulates the speed of lights from 0 to 300W.

 

 

The lights in our growing place can be connected to the power regulator reducing or increasing the lights' strenght.

 

 

Specifications:

- Cornwall Electronics
- Power regulator
- LED power indicator
- Voltage: 230V
- Frequency: 50Hz / 1.6A
- 0-300W

Master controller are able to control the lights to simulate sun rise and sunset.

 

 

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

 

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

 

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

 

 

 

Gavita Master controller EL1

 

 
Lighting control at your fingertips!

 

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

 

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

 

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

 

You can connect all your e-series fixtures to one controller.
 

 

Gavita Master controller EL2

 
 

Maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the mains and you are ready to use your lighting system.

 

The controller can turn on and off all modules connected to it (Model EL2 can control two separate rooms with up to 40 ballasts in each, or just one with up to 80 ballasts), can adjust the desired level of light emitted by the modules (percentage or as absolute value) and even mimics sunrise and sunset, by gradually starting and stopping the lamps when they are turned on and off.

All light bulbs need to be wiped clean of finger prints after installation.

 

Our micro fiber lamp cleaning cloth is perfect for doing this. Removes finger prints and dust from lamps, glass, light fixtures, etc. Individually packaged.

Adjust A Wing Socket 

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but is made of a different grade of aluminum.

 

 

Includes Heat shield Spreader.
Tomax has the same advantages as the original, including an impressive low-hanging position over your plants and balanced light distribution.

 

 

No lamp included.

 

Economical dual parabolic reflector
Control the "hot spots" by attaching the "Heat shield Spreader"

 

 

EFFECT

 

- Twice as powerful and effective as most other reflectors on the world market
- Increases growing area for each lamp by up to 75%
- Increases lamp output by up to 50%. Reduces heat and saves energy

 

 

The reflector is a surface that reflects through the refraction of light.The main function of the reflector is to reflect light on your plants, covering the maximum area and reflecting the maximum light emitted by your chosen lamp. directly on your plants.

 

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but is made of a different grade of aluminum.

 

Includes Heat shield Spreader.
Tomax has the same advantages as the original, including an impressive low-hanging position over your plants and balanced light distribution.

 

No lamp included.

 

Economical dual parabolic reflector
Control the "hot spots" by attaching the "Heat shield Spreader"

 

EFFECT

 

- Twice as powerful and effective as most other reflectors on the world market
- Increases growing area for each lamp by up to 75%
- Increases lamp output by up to 50%. Reduces heat and saves energy

 

The reflector is a surface that reflects through the refraction of light.The main function of the reflector is to reflect light on your plants, covering the maximum area and reflecting the maximum light emitted by your chosen lamp. directly on your plants.

 

Parabolic Vertical & Horizontal HPS & MH Reflector - [Size: Medium (Diameter 89CM)]

 

 

• Brushed aluminium on both sides
• Includes assembly hardware
• The reflector includes a lamp socket mounting bracket. The lamp can either installed vertically or horizontally
• Exclusive adjustable bracket allows the user to raise or lower the lamp within the interior of the reflector

  

 

Features
 

• Innovative Design: can be installed vertically or horizontally
• User-friendly, easy installation
• Made from premium highly reflective aluminum
• Comes with built-in UL-certified socket and 4.5m pre-wired lamp cord
• The lamp is not included in the system

The Azerwing reflector of PrimaKlima is how the famous Adjust-A-Wings reflector, coated with PVD reflector plates fitted.

• A stable railing make easy the suspension of Azerwing tremendously, just like the well thought-out cable management. But a real feature of Azerwing is the ability to adjust the wording not only in height but also in pitch.
• That is enormously helpful particularly with heavy bulbs such as energy-saving lamps and enables rapid adaptation, without having to disassemble the reflector only.
• Three enclosed rod sets make it possible to adjust the Azerwing on each required area. The Azerwing suitable for 400 and 600 W bulbs.
• Azerwing Reflector Medium
• Highly reflective PVD Coated reflector material (96%)
• Adjustable angle bulbs
• Thoughtful cable management
• Stable suspension
• Three settings on the leaf width

Hammered Stucco grow reflector

 

 

 

Specifications

• HID/CFL Euro Stucco Wing Aluminum Reflector 
• highly reflective alumimum 
• work for HID and CFL bulbs 
• broad light spread

Aluminum Reflector Micropunto Pearl-Pro With it you get a much higher standard reflector performance.

 

 

May increase by 60% the number of lumens keeping yourself and your own lamp ballast.The secret lies in its micropunteado system, spreading more evenly lamp lumens.Micropunteado your new system is more efficient. Causing a dramatic increase in lumens.The new junction box increases safety. Keeping moisture away from crop electrical connections.The metal mounting plate is more resistant. It supports more weight lamps.

 

• 2 Presses safety chain connection. So you can install more than one reflector with less wiring.
• Passing the cable from one to another.

Adjust-A-Wing Enforcer

 

The Enforcer is a hobby version of the popular Avenger!

 

 

It's shape gives the same even distribution of light and reflectivity as the Avenger but is made from slightly lower grade aluminium and doesn't include the Super-Spreader.

if you like the thought of using the Adjust A Wing Avengers but can’t quite justify paying for the premium product, they are at a much more affordable price, Adjust A Wing Enforcer gives you the same benefits as the Avengers, including impressively low hanging positions over your plants balanced distribution of light.

 

 

Enforcer :- This is our new “budget priced” range. Reflection is approx 86% & guaranteed to maintain its full reflection for a minimum of 3 years… Probably good for 5+ years of continual use but we can’t 100% guarantee that.. These reflectors work extremely well for the price you pay. Great way for customers to try out our designs without committing to the more expensive Avenger range straight up. 

 

 

ECONOMY DOUBLE PARABOLIC REFLECTOR

 

• Low Cost for High Reflectivity
• Control "Hot Spots" by attaching a "Super-Spreader"

 

 

EFFECT

 

• Twice the power and efficiency of most other reflectors in the global market
• Increase the growing Area under each lamp by up to 75%
• Increase Yield per Lamp up to 50%. Reduce heat, Save power

Defender e model Adjust-A-Wings created more professionally oriented than you.

 

 

It has all the qualities of the model Enforcer, but unlike him to combine a combination of high-end technology, aesthetics, durability, efficiency and easy installation.

 

 

The main difference is that in making Defender is used extremely robust aluminum (H18) used in aircraft construction, which is extremely robust and extremely flexible. This allows keeping the perfect parabolic curve so important for the dispersion of light, otherwise vulnerable to changes in the assembly and disassembly of the reflector. Furthermore, the surface is coated with titanium white, heat-resistant polymer coating reducing radiated heat lamp and having the ability to spread the light very evenly and having reflectivity of 86%.

 

 

Characteristics:

• Size: 55h80 cm
• Suitable for: 600W or 400W sodium (HPS) and metal halide (MH) lamp
• Lit area: Up to 2.3 m2.
• The kit contains:
• 1 PC. - Adjust-A-Wings Reflector, Defender medium
• 1 PC. - spreader
• 1 PC. - Cap
• - Cordless
• - 86% reflectivity
• The kit does not include the bulb.

• Twice the power and efficiency of most other reflectors in the global market;
• Increase the growing Area under each lamp by up to 75%;
• Increase Yield per Lamp up to 50%;
• Reduce heat, save power;
• Corrosion Resistant;
• 97% Reflective;
• Glass Coated Super Alloy;
• Adjustable double parabolic reflectors.

Made from the most high-quality materials, this reflector brings a number of benefits to both plants and gardeners.

 

Comparison To Conventional Reflectors:

• Twice the power and efficiency of most other reflectors
• 75% Larger Growing Area
• 43% Saving In Electricity
• 43% Less heat
• The super reflective surface is vapour coated with molten glass and titanium dioxide. It is coated in PVD / Ceramic.

 

Maxlight Reflector by HighPro features a white aluminium exterior for better overall light distribution on the growing area and a high-quality stucco aluminium interior that provides plants with optimum reflectivity.

 

 

It is equipped with the cool tube system, which allows you to place the reflector closer to the plants and thus improve the yield, as excess heat is eliminated through two lateral vents with the aid of a fan. It also features a glass screen that acts as a heat insulator between the lamp and the plants. This screen is fixed with some small metal parts that allow easy disassembling for comfortable cleaning.

DIAMOND REFLECTOR FOR 400W BULB

 

 

With a standard reflector you usually get "heat spots" and spots that don't get enough light under the reflector.This reflector concentrates the light evenly on a surface of 100cm x 100cm and is designed for 250 and 400W bulbs.

 

 

Diamond Reflectors are the result of 15 years experience in the hydroponics industry. Photometric Laboratory testing has revealed that diamond reflectors produce an average light intensity of up to 50% more than conventional reflectors. This Diamond Reflector has been optimized for use with a 600w or 1000w lamp with a coverage of 1.2 m2 (square meters) and a mounting height of 30-50cm above your plant tops.

 

 

• Suitable for 600w - 400w HID Lamps
• Can produce up to 50% yield increase
• Unique diamond shape

Reflector Diamond 600W

 

 

Diamond Reflectors are the result of 15 years experience in the hydroponics industry. Photometric Laboratory testing has revealed that diamond reflectors produce an average light intensity of up to 50% more than conventional reflectors. This Diamond Reflector has been optimized for use with a 600w or 1000w lamp with a coverage of 1.2 m2 (square meters) and a mounting height of 30-50cm above your plant tops.

 

 

• Suitable for 600w - 400w HID Lamps
• Can produce up to 50% yield increase
• Unique diamond shape

The reflector is suitable for 400W & 600W lamps.

 

 

Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

 

DIAMETER	Ø 125mm
LENGTH	300mm

 

 

 

 

E40 lamp-holder is included.

Reflector suitable for 600W lamps.

 

 

The Cool Tube is a tubular armature of glass with the function of regulating the temperature of the lamp.Warm air given of by the lamp is sucked out with the result of a lower heat in the growing are.Attach a small fan and it will blow away the hot air from the lamp.The lamp's temperature will thus be reduced by 30-40%.The lamp can also be brought nearer the tops of the plants.Perfect for rooms where several lamps are connected.

 

DIAMETER	Ø155mm
LENGTH	490mm
WEIGHT	2.500kg