Ventilation and Climate

60g CO2 filling spray for Airbomz Dispenser

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Electric motor of the type of motors with external pole.
• Longer life due to compact design.
• Developed for direct wheel mounting, equipped with winding class B (thermal protection).
• Class C ball bearings with pre-lubricated grease.
• Built-in thermal protection (in case of overload, the fan switches off immediately).
• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Current: 2.5 A
• Power: 245W
• Flange inlet: Ø250mm
• Flange outlet: Ø250mm
•  

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Developed for direct mounting on wheel, provided with winding class B (thermal protection).
• Class C ball bearings with pre-pressed grease lubrication.
• Because the electric motor is in the cochlea, it is optimally cooled.
• Built-in thermal protection (in case of overload, the fan is switched off immediately). Technical data:
• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Airflow: 1500-1570.
• Amperage: 1.6. Amp
• Wattage: 147W
• Flange inlet: Ø250mm
• Flange outlet: Ø250mm

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Electric motor of the type of external pole motors.
• A longer lifespan due to the compact design.
• Developed for direct mounting on wheel, provided with winding class B (thermal protection).
• Class C ball bearings with pre-pressed grease lubrication.
• Because the electric motor is in the cochlea, it is optimally cooled.
• Built-in thermal protection (in case of overload, the fan is switched off immediately). Technical data:
• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Airflow: 2500-2650.
• Amperage: 3.5. Amp
• Wattage: 300W
• Flange inlet: Ø250mm
• Flange outlet: Ø315mm

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Air flow: 3250-3430.
• Current: 5.73A
• Power: 420W
• Flange inlet: Ø250mm
• Flange outlet: Ø315mm

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Longer life due to compact design.
• Designed for direct mounting of a wheel equipped with a winding class B (thermal protection).
• Class C ball bearings with pre-lubricated grease.
• Built-in thermal protection (in case of overload, the fan shuts off immediately).
• Supply voltage: 1 / 220-240V phase.
• Operating temperature: -30ºC to + 50ºC.
• Air flow: 4250-4470.
• Voltage: 8A
• Power: 550W
• Flange inlet: 2x Ø250mm
• Flange outlet: Ø315mm

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø100mm / L=900mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø125mm / L=900mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø150mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø160mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø200mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø250mm / L=1000mm

Set of 15m transparent hose and 20pcs x triple connectors for CO2 boost generator, thanks to which you can adjust your Co2 Boost, so as to fit in the desired garden, regardless of its size.

Cut the transparent hose into as many pieces as you wish contact and branched triple "T" shaped connectors.

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø315mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø355mm / L=1000mm

Powdered Sulphur for Hotbox Sulfume Vaporiser

The Powdered Sulphur for the Hotbox Sulfume Sulphur Vaporiser is one of the best ways of preventing pests and moulds getting a hold in your grow-room. The hotbox slowly releases sulphur vapour which inhibits the spread of powdery mildew, botrytis and pests such as spider mites.

• Excellent preventative measure against moulds and many garden pests
• For use with the Hotbox Sulfume Sulphur Vaporiser
• Best used in the dark period when garden extraction is switched off
• Non-toxic to humans and does not affect growth of plants
• Also available as part of Hotbox Sulfume Sulphur Vaporiser Kit

Powdered Sulphur for use with the Hotbox Sulfume Sulphur Vaporiser

Contains:
1 x 500g pack of Powdered Sulphur or 1 x 2kg pack of Powdered Sulphur

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø400mm / L=1000mm

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

An insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing.

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Generator of Co2 Gen of last technology.

It has no pilot light, so it makes it much safer for the user. It has dual solenoid valves, safety shut-off and precision burners. Available in various models for all types of growers.

Generator CO2 GEN offers the indoor grower the most efficient and effective method to increase carbon dioxide (CO2). Experienced SUPERPRO engineers have designed 2 CO2 burners that are not only reliable but have an impressive safety list and features that offer consumers the peace of mind of knowing they are using the safest and best product on the market today.

All SUPERPRO generators are individually leak tested to ensure reliability. In addition, multiple quality controls are performed and each unit is approved by highly qualified personnel.

Generator of Co2 Gen of last technology.

It has no pilot light, so it makes it much safer for the user. It has dual solenoid valves, safety shut-off and precision burners. Available in various models for all types of growers.
Generator CO2 GEN offers the indoor grower the most efficient and effective method to increase carbon dioxide (CO2). Experienced SUPERPRO engineers have designed 4 CO2 burners that are not only reliable but have an impressive safety list and features that offer consumers the peace of mind of knowing they are using the safest and best product on the market today.

MODELS:

- GEN-4LP:
Advanced electronic ignition module "4 stages" the GEN-4 eliminates the pilot flames open for correct operation.
GEN-4 double solenoid valves provide complete redundancy with gas controls.
GEN-4 anti-tilting or "tilt switch" function that instantly turns off the gas flow if the unit is not upright.
Multiple GEN-4 thermal shields provide additional protection to critical components.
GEN-4 uses clean combustion precision milling bronze burners and only the highest quality components for assembly.
GEN-4 is available in Natural Gas
Suitable for 85m3
All SUPERPRO generators are individually leak tested to ensure reliability. In addition, multiple quality controls are performed and each unit is approved by highly qualified personnel.

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.