Ventilation and Climate

Noise-isolating fan in an MDF box. Draws warm and moist air from growing areas.

The fan should be sized for an airflow 30 to 50 times the volume of your grow room. You can then effectively control the fan speed with other devices depending on the temperature and humidity. You will not only use the full potential of the Airfan, but also further reduce possible noise to a minimum.

The Soft-BOX 2500 m3/h fan is mounted in MDF panels with insulating foam that covers the interior and thus reduces the noise produced by the fan.

- Suitable outlet fan for rooms with dimensions of about 20 sq.m.

• 3 speeds.
• For mounting on a flat surface (table/desk), floor or wall.
• Adjustable height, max. 125 cm
• Oscillation - 90º
• Voltage: 220 V - 50 -Hz.
• Power: 45 W.
• Base 50 x 50 cm.
• Dimensions 50 x 44 x 125 cm.

AIRFAN® SOFT BOX consists of a centrifugal fan and an MDF box. The enclosure is soundproofed with an internal coating of high-quality and durable insulating foam to minimize noise production. Since the fans are protected thanks to rubber rings, the fan has no direct contact with the frame, so it does not transmit any vibrations. These devices are designed to operate at high pressure, emitting as little noise as possible. Connections are designed for round pipes and pipelines.

 

Features: Output: 1x315mm

Input: 2x250mm

Power: 550W

Speed range (m3 / h): 700 - 3600

Consumption (W): 598 - 1334

Noise level (dB): 37.2

Supply voltage: 1-phase 220 / 240V - 50Hz

Temperature range: -30°C to +70°C

Protection class: IP44

Original prefilter Can-Lite Prefilter for carbon filters that have CAN-Lite activated carbon. It envelops the filter and protects it from the entry of larger particles, thus extending its life. To ensure optimal filter performance, it is important to replace the prefilter regularly, depending on the air quality of the environment where it is used. In very clean environments, it is recommended that the prefilter be changed once a year. If the filter operates in a very dusty environment, changing the prefilter every six months is recommended. Regular replacement will ensure long-lasting and efficient operation of your Can-Lite carbon filter.

Noise-isolating fan in an MDF box. Draws warm and moist air from growing areas.

The fan should be sized for an airflow 30 to 50 times the volume of your grow room. You can then effectively control the fan speed with other devices depending on the temperature and humidity. You will not only use the full potential of the Airfan, but also further reduce possible noise to a minimum.

The ISO-BOX 6000 m3/h fan is mounted in MDF boards with insulating foam that covers the interior and thus reduces the noise produced by the fan.

Features:

• Flange inlet: 2xØ315mm
• Outlet for flange: Ø405mm
• Capacity: 6000m³ / h
• Power supply: 230 v / 50 Hz
• Power: 1100W
• Temperature range: -30°C to +70°C
• Protection class: IP44

Suitable outlet fan for rooms with dimensions of about 48 sq.m.

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

 

 

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

 

 

Sizes and technical data:

 

• Packaging: 200x250x180mm
• Controller: 265x300x205mm
• Intended for: 8A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Class of protection: IP44

Parafiltër origjinal Can-Lite Prefilter për filtrat e karbonit që kanë karbon aktiv CAN-Lite. Ai mbështjell filtrin dhe e mbron atë nga hyrja e grimcave më të mëdha, duke zgjatur kështu jetën e tij. Për të siguruar performancën optimale të filtrit, është e rëndësishme që të zëvendësohet rregullisht parafiltri, në varësi të cilësisë së ajrit të mjedisit ku përdoret. Në ambiente shumë të pastra, rekomandohet që parafiltri të ndërrohet një herë në vit. Nëse filtri funksionon në një mjedis me shumë pluhur, rekomandohet ndryshimi i parafilterit çdo gjashtë muaj. Zëvendësimi i rregullt do të sigurojë funksionim afatgjatë dhe efikas të filtrit tuaj të karbonit Can-Lite.

Noise-isolating fan in an MDF box. Draws warm and moist air from growing areas.

The fan should be sized for an airflow 30 to 50 times the volume of your grow room. You can then effectively control the fan speed with other devices depending on the temperature and humidity. You will not only use the full potential of the Airfan, but also further reduce possible noise to a minimum.

The ISO-BOX 1500 m3/h fan is mounted in MDF boards with insulating foam that covers the interior and thus reduces the noise produced by the fan.

Features:

• Connections: 2x 250 mm (IN / OUT)
• Capacity: 1500m³ / h
• Speed range (m3 / h): 300 - 1520
• Power supply: 230 v / 50 Hz
• Power: 414W
• Noise level (dB): 36.7
• Temperature range: -30°C to +70°C
• Protection class: IP44

Original prefilter Can-Lite Prefilter for carbon filters that have CAN-Lite activated carbon. It envelops the filter and protects it from the entry of larger particles, thus extending its life. To ensure optimal filter performance, it is important to replace the prefilter regularly, depending on the air quality of the environment where it is used. In very clean environments, it is recommended that the prefilter be changed once a year. If the filter operates in a very dusty environment, changing the prefilter every six months is recommended. Regular replacement will ensure long-lasting and efficient operation of your Can-Lite carbon filter.

AIRFAN® SOFT BOX consists of a centrifugal fan and an MDF box. The enclosure is soundproofed with an internal coating of high-quality and durable insulating foam to minimize noise production. Since the fans are protected thanks to rubber rings, the fan has no direct contact with the frame, so it does not transmit any vibrations. These devices are designed to operate at high pressure, emitting as little noise as possible. Connections are designed for round pipes and pipelines.
 

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

 

 

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

 

 

Sizes and technical data:

• Controller: WxHxD = 265x300x205mm
• Intended for:  8A/1800W
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

"Rhino-Max" set is an ideal solution if your room for growing is in size 9-10 square meters.

Galvanized steel to prevent rusting. furthermore, is compatible with all duct types. Commonly used for rangehood installations, connecting two pieces of 120mm duct together, these galvanized steel connectors are suitable for either aluminium foil or semi-rigid duct and slide inside the duct.

Metal duct connectors are metallic components suitable for connecting air duct pipes.
 Available with different hole diameters.

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

 

 

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons.The controller is waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller

 

 

Technical data:

 

• Case: WxHxD = 200x250x180mm
• Kontroller: WxHxD = 265x300x205mm
• Intended for: 2,5A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• Аccuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

Galvanized steel to prevent rusting. furthermore, is compatible with all duct types. Commonly used for rangehood installations, connecting two pieces of 120mm duct together, these galvanized steel connectors are suitable for either aluminium foil or semi-rigid duct and slide inside the duct.

Metal duct connectors are metallic components suitable for connecting air duct pipes.
 Available with different hole diameters.

Galvanized steel to prevent rusting. furthermore, is compatible with all duct types. Commonly used for rangehood installations, connecting two pieces of 120mm duct together, these galvanized steel connectors are suitable for either aluminium foil or semi-rigid duct and slide inside the duct.

Metal duct connectors are metallic components suitable for connecting air duct pipes.
 Available with different hole diameters.

Humidity and temperature controller for intake and exhaust air fan with additional 2 programmable outputs and LCD display

 

 

Hardware:

• 2pcs. Variable outputs for fans
• 2pcs. Programmable outputs for appliances
• 1pcs. Temperature and humidity sensors with light detector (air)
• 1pcs. Temperature Sensor (Waterproof)

 

 

The 16A ventilation controller is built from a solid very robust aluminium housing. It can control up to 2200W power per outlet. In addition to a conventional temperature and humidity variable control the 16A controller carries 2pcs individual programmable outlet sockets. These can be assigned to one of the two sensors or be controlled by a timer function. Particularly attractive is the huge number of parameters that can be set for day/night individually to fulfill all desired requirements. The controller carries two transistor outputs for fans (phase control) and parallel working internally two 0-10V outputs.

 

Depending on the version, the controller is equipped with a USB port for data logging. All relevant measurement data and control signals get written on a CSV file to the USB stick, later they can get evaluated in an Excel application. The 16A controller has a free slot for a pressure sensor to control the intake air fan depending on the pressure difference.

 

 

The device has a protection fuse of 16A, which is considered as maximum allowable load for the entire controller. Each single output can carry max. 2200W per socket and all outputs together have a max. load of 3600W/16A. The device comes with a 2m connection cable to connect to a conventional household outlet of 230V/16A. The sensors are supplied with a 4m long cable which can be expanded up to 10m. A digital display and four navigation keys provide easy navigation in the Menuand 6LED lights are indicating the current switching status.

 

 

Among other things, settings such as display functions, memory frequency and languages, English, German, French, Spanish and Italian, can be selected.

 

 

Sizes and technical data:

 

 

• Case: WxHxD = 120x180x80mm
• Controller: WxHxD = 150x210x110mm
• Voltage: 230V / 50Hz / I max: 16A / 3600W
• Humidity and temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to 257°F) Accuracy 0.5°C from -10°C to + 85°C Humidity Accuracy ± 4.5% rh
• Temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to + 257°F)
• Accuracy 0.5°C from -10°C to + 85°C
• Protection class: IP54

Generator of CO2 by 10 nozzles.

 

 

CO2 generators LPG are the most effective and economical method for increasing levels of CO2 in greenhouses. Visokonadezhni and secure devices with electronic ignition. GEN-10 can operate at 2, 6 or 10 nozzles respectively conservatory to 30m3, up to 180m3 or 300m3. Redundant electronic ignition, operating at 24V. Redundant valves. Safety system, excluding combustion in tilting the device. Made of high-quality components, each unit is factory tested.

 

 

• Power: 400mA / 24V DC
• Thermal power: 2263 BTU / h (663 W) for each nozzle
• A separate CO2: 85 l / h for each nozzle gas pressure: 2.8 kP

Galvanized steel to prevent rusting. furthermore, is compatible with all duct types. Commonly used for rangehood installations, connecting two pieces of 120mm duct together, these galvanized steel connectors are suitable for either aluminum foil or semi-rigid duct and slide inside the duct.

Metal duct connectors are metallic components suitable for connecting air duct pipes .
& nbsp; Available with different hole diameters.

The set "Rhino-Can" is a suitable option for a room for growing with sizes of 8-9 square meters.

Galvanized steel to prevent rusting. furthermore, is compatible with all duct types. Commonly used for rangehood installations, connecting two pieces of 120mm duct together, these galvanized steel connectors are suitable for either aluminium foil or semi-rigid duct and slide inside the duct.

Metal duct connectors are metallic components suitable for connecting air duct pipes.
 Available with different hole diameters.

AC-EC LCD fan controller for 2fans 2x5A

 

 

This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal.

 

2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button.

 

 

Features:

-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

 

LCD display:

-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

 

 

The Rhino Pro Filter is constructed from Australian-mined RC412 carbon, the best in the world.

 

 

The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminium make the Rhino filter smaller and easier to handle. How long will a Rhino Pro Filter last? Unlike all other carbon filters with effective life spans of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years. Replacement carbon sleeves are available to make them last even longer.

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

The "Rhino-Max 160" set is an appropriate option for a room for growing size 5 m3.

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt).

 

 

The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.

 

Settings range:

• Temperature: 20C° - 30C°
• Humidity: 30% - 100%
• Minimum speed: off, 20% - 100%
• Negative pressure: 100% - 50%

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

The "Sono Can" set is an ideal option if your growing room is 6 square meters in size.

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

 

 

The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

 

 

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x100mm
• Designed for: 2x5A / 2x1150W (2300W) / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class IP54

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

The set "Rhino-Can 160" is a suitable option for a room for growing with dimensions of 6 square meters.

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

Generator of Co2 Gen of last technology.

 

 

It has no pilot light, so it makes it much safer for the user. It has dual solenoid valves, safety shut-off and precision burners. Available in various models for all types of growers.

Generator CO2 GEN offers the indoor grower the most efficient and effective method to increase carbon dioxide (CO2). Experienced SUPERPRO engineers have designed 4 CO2 burners that are not only reliable but have an impressive safety list and features that offer consumers the peace of mind of knowing they are using the safest and best product on the market today.

 

- Power: 400mA / 24V DC
- Thermal power: 2263 BTU / h (663 W) for each nozzle
- A separate CO2: 85 l / h for each nozzle gas pressure: 2.8 kPa

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).

 

 

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

 

 

Sizes and technical data's:

 

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A 2300W
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

This range of filters provides the novice grower with a technologically sophisticated, easy to use filter system.

 

 

The Rhino Hobby provides flexibility and a longer shelf life due to its unique fully reversible neck and the fact that it's filled with the highest quality carbon available. Rhino Hobby is available in a wide variety of sizes, specifically designed for hobby growers. Rhino Hobby filters are filled with the same high quality Australian mined RC412 carbon as the Rhino Pro range of filters.

 

 

A 30mm carbon bed is tightly packed into the airflow cylinder which makes it a highly effective at attracting and absolving the air of pollutants. The smaller bed depth of carbon to that of the Pro filter makes it an even easier filter to handle and manage for the novice grower. As it has the most effective carbon integrated into the filter the Rhino Hobby will last significantly longer than other filters on the market aimed at the hobby grower.

 

 

Features of Rhino Hobby Filters:

• Fully reversible neck – prolongs lifespan

• Australian mined RC412 carbon: the purest activated carbon on the market

• 30mm carbon bed: Rhino quality for the hobby grower

• 9-12 month lifespan

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.

Metal clamps are available in a box containing 100pcs. 

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

EC LCD controller for 2fans

 

This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes. The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all connectors 4pole 3.5mm jack. It ready to use.

 

You can program 15 individual settings with only three buttons

 

 

Features:
-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

 

 

LCD display:
-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

 

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The "Can 350" kit includes the main elements of a ventilation system - a fan and a filter.

 

 

Optionally, to the set can be added duct type Sonoconnect F127 x 2 meters - to take advantage of this option, please leave a comment with your order. The kit is suitable for rooms up to 2.80 square meters

 

Contains:

• outake fan Can Fan  Ф125 / 350m3 / h
• Can Lite filter Ф125 / 425 m3 / h
• cable with plug

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The "MAX 600" kit includes the main elements of a ventilation system - a fan and a filter.

 

 

Optionally, to the set can be added duct type Sonoconnect Ф152 x 2 meters - to take advantage of this option, please leave a comment with your order. The kit is suitable for rooms up to 4.20 square meters

 

Contains:

• outake fan Max Fan  Ф150 / 600m3 / h
• Can Lite filter Ф150 / 600 m3 / h

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans.

 

 

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

 

 

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 1A / 200W / TRIAC 1x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.

The "Can 780" kit includes the main elements of a ventilation system - a fan and a filter.

 

 

Optionally, to the set can be added duct type Sonoconnect Ф160 x 2 meters - to take advantage of this option, please leave a comment with your order. The kit is suitable for rooms up to 6.20 square meters

 

Contains:

• outake fan Can Fan  Ф160 / 780m3 / h
• Can Lite filter Ф160 / 800 m3 / h
• cable with plug

Y connectors are components for a branch of a ventilation system. Thanks to them you can adapt the separated elements to the room in which growing your plants.

Fresh air is your friend! Each growing room (indoor) must have a well-designed ventilation system. In order for your garden to be successful and for the harvest to be of high quality, you must also consider cleaning, bringing fresh air into the room and ventilation. Here are the most important components needed to build the ideal ventilation system for your needs.