The innovative GARDENA Water Smart Flow Meter allows targeted irrigation that is measured and mindful

At a glance, you can see

1. the water consumption per day,

2. the water consumption per season,

3. the water consumption per watering session

4. the current flow in litre per minute.

The consumed water quantity can be read at any time on the large display and thereby controlled. With a single button for all functions, the Water Smart Flow Meter is easy to use. Until now, irrigation has been a matter of personal judgment and one's form on the day.

The Water Smart Flow Meter ensures that you have better control. From now on, you can water in a targeted, requirement-suitable and systematic way. This is good for the garden, the environment, and the wallet. The Water Smart Flow Meter is battery-operated and can be immediately connected to the tap, to a sprayer, a sprinkler or a pump.

The robust and impact-proof Water Smart Flow Meter is simply clicked onto the Threaded Tap Connector or Standard Hose Connector and immediately supplies important data through active measurement. An integrated battery-level display secures precise operation. This innovative meter raises awareness of water consumption.

INSTRUCTIONS MANUAL YOU CAN DOWNLOAD FROM HERE

The DV-101А is a multifunctional digital seconds time clock that helps you to water crops time controlled.

• Dimensions in mm: 210 x 115 x 110.
• Voltage: 230 V
• AC/ 50 Hz.
• Max. power: 5 Amps.
• Isolation level: IP-44

Gravity feed and main pressure irrigation controller

The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

Key Features:

• 2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FREQUENCY dial to desired time you want between irrigations.

Benefits:

• Ideal for gravity feed allotment systems to control feed from a water butt/reservoir
• Weather resistant
• Operated with two 1.5v AAA alkaline batteries (not included) that can last a full season without needing to be changed
• Auto safety valve shut-off when battery power is low and programme delay button for when you need to do plant maintenance work and don’t want to be irrigating
• Comes with all required fittings and inline filter

The T15 series can switch on and off devices (fans, heaters, alarms) at a set temperature. The T15 series is intended for single-phase use.

Benefits:

• Low investment
• Easy to install
• Easy to operate
• Durable and robust
• Applicable for both new and existing ventilation systems

Feature T15-WD 
Switches single phase devices on and off at a set temperature

It regulates the speed of lights from 0 to 300W.

The lights in our growing place can be connected to the power regulator reducing or increasing the lights' strenght.

Specifications:

- Cornwall Electronics
- Power regulator
- LED power indicator
- Voltage: 230V
- Frequency: 50Hz / 1.6A
- 0-300W

Humicon is a wall socket unit which is able to control an extractor according to the level of humidity.

This unit comes with an option of connecting a humidifier or dehumidifier. This unit is completely digital and constantly displays the current humidity of the environment.

• Maximum charge: 16 A - 3680 W (resistive) 16 A - 460 W (Inductive)
• Control range: 30 - 90 %
• Operating temperatures: 0 - 40 ºC
• Precision: ± 5% 

Tempcon VDL is a temperature controller that is responsible of switching on/off heaters or coolers depending on the needings of your growroom.

Temperature controller Tempcon by VDL has an in-built probe that allows it to boot/shut-down all deviced connected to through it, to make more efficient the use of heaters or air conditioners.

VDL Tempcon is a plug-in temperature controller, that lets your switch on/off enviromental devices when detecting temperatures lower or upper than set up.

Tempcon has two main functions:

• Keep minimum temperature under control.
• Keep maximum temperature under control.
• One chosen the function we want Temcon set our devices to work, it will only be necessary to set up the temperature to keep.

Tempcon allows growers to connect heaters, fans, extractors, air conditioners or any electronic device that might be used for increasing/decreasing temperature.

• Maximum load: 16A - 3680w (resistive) / 16A - 480W (inductive).
• Temperature range: 0ºC to 40ºC.
• Precision +/- 1ºC.

Faran Humidistat HR-EHSA humidity controller

No neccessary of additional unit for installation. Easy to use with its simple constructure. Manufactured to use for only one humidifier since the capacity of internal switch is only 2.2 ampere. High durability and trouble free.

SPECIFICATIONS:

- Measurement : 10%~80%(rH%)

- Accuracy : +/- 5%

- Operation span : 3%

- Openration method : ON/OFF

- Capacity of microswitch : 2.2A

- Temperature : 10~40(Centigrade degree)

- Sensor type : Nylon Loop

- Dimension : 140H X 95L X 45W(mm)

- Power supply : 110V(220V) / 60Hz(50HZ)

- Power cord : 2m

The SMSCOM fan controller is ideal for dimming down your intake or exhaust fan.

The system ensures a constant air flow. With the left dial you can pre-set your fan on a minimum speed it will run at, in order to operate more efficiently, stealthily and with greater control over temperature and humidity. 

THE SMARTEST FAN CONTROLLER ON THE MARKET

When used as fan controller:

The fancontroller works as a manually adjustable dimmer. You can set the fan speed with the left control knob. Just plug your fan into the controller - ready to go! 

Attention!

• The right control knob has got no function, until a temperature sensor is plugged in!
• Use as Smart Controller (you need the temperature sensor):
• After you connected the fan controller with the temperature sensor, you can set the desired room temperature with the right control knob. The smart controller automatically adjusts the fans speed, to ensure that the set temperature is satisfied.
• If the temperature in the room decreases below the set temperature, the fan will decrease down to the set minimum speed on the left dial. Perfect for nighttime temperature fluctuations! 
• The SMSCOM Smart Controller is a powerful little unit that has thermostat controlled Motion Flow technology to continuously regulate the room. The smart sensor technology continuously measures the temperature of the room and regulates the fan speed accordingly, keeping your plants happier and also reducing electricity bills!

• Plug and play, no wiring necessary
• Made in Holland
• Max load 6.5 amp
• Very smooth fan speed adjustment
• Reduced power consumption
• Increased energy efficiency in your production cultivation

The SMSCOM Smart Controller is a compact ventilation controller in a plug housing.

Maximum current is 6.5 amperes. The SMSCOM Smart Controller is electronically controlled and provides a simple, accurate method for the correct temperature of your room (NTC* needs to be attached). The SMSCOM Smart Controller continuously regulates the correct speed for your fans and reserves the right temperature.

Smart controller sensor

• length: 3m
• amperage: 6.5A

Master controller are able to control the lights to simulate sun rise and sunset.

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

Gavita Master controller EL1

 
Lighting control at your fingertips!

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

You can connect all your e-series fixtures to one controller.
 

Gavita Master controller EL2

Maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the mains and you are ready to use your lighting system.

The controller can turn on and off all modules connected to it (Model EL2 can control two separate rooms with up to 40 ballasts in each, or just one with up to 80 ballasts), can adjust the desired level of light emitted by the modules (percentage or as absolute value) and even mimics sunrise and sunset, by gradually starting and stopping the lamps when they are turned on and off.

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs).

• The come with localized male and female plugs so that installing auxiliary equipment is just a matter of plug and play.
• Never guess anymore if a contactor is switched on or off: the LED on the ECM clearly shows the status of the contactor.
• Mount it right next to the equipment you want to control, and just plug in the (safe, low voltage) control wire in the ECM and the controller.

• ECM Voltage 120-240V
• ECM Current 15A AC3
• ECM Switch type DPST (Double pole, single throw)
• ECM AC terminals Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
• ECM Steering Input Low voltage from controller, cage clamps
• ECM On-indication Blue LED
• Warranty 3 years

Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing

• IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 68-108°F (20-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments
• COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on front panel with ample durability ensures it will not rust or malfunction under tough conditions; Suction cup on the power cord helps to fix the sensor probe to the target
• LED INDICATOR - Included illuminated LED screen display is easy to read and the program will help you to keep in mind the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
• EASY SET-UP - Simply plug the mat into the thermostat then place the temperature probe at the desired location; The 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats
• SAFETY GUARANTEED - Heat mat can be safely plugged into an angled 3-end outlet socket that is UL certified, which also prevents cords from tangling and supports a 1000W power load; Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is ideal for wherever you need to place

ROOT!T's electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.

The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.

Features: 

• Easy to use and control 
• Temperature control
• range 20ºC to 42ºC 
• Controls temperature of heat mats evenly in colder/warmer than normal environments 
• Provides constant optimum temp for specific plants. 
• Easy plug-in operation 
• Indicator light 
• Simple to use 

Water damage is very annoying and can be costly.

With this water alarm, you are warned in time in case of leakage. Excellent for use in for example your washing machine or boiler. Easy to install.

* 24 hour protection
* Easy functionality test
* stand alone battery powered
* Low battery indication